GARAGE DOOR REPAIR PROJECT
Garage Door Roller & Cable Repair on Sweetwater Ave in Phoenix
A homeowner in North Mountain called Glendale Garage Doors Pros because the garage door was making noise and was no longer opening and closing smoothly. Eric replaced worn rollers, installed a new bottom seal, replaced a damaged cable found during the job, and programmed a new Chamberlain remote for the customer.
The Garage Door Was Noisy and Moving Roughly
The customer was hearing unusual noise from the garage door, and the door was no longer opening and closing as smoothly as it should. The rollers had become old and worn, which was affecting how the door moved along the tracks.
The bottom seal was also flat, dirty, and no longer sealing the bottom of the door properly. During the repair, Eric also found a damaged garage door cable that needed to be replaced.
What Eric Found During the Repair
-
1
Worn Garage Door Rollers
The old rollers were worn and contributing to the noisy, rough movement of the garage door.
-
2
Damaged Garage Door Cable
While completing the repair, Eric found a damaged cable that needed to be replaced.
-
3
Worn Bottom Seal
The existing bottom seal was flat and dirty and was no longer providing a proper seal along the bottom of the door.
Garage Door Repairs Completed on Sweetwater Ave
Eric addressed the original roller and seal problems and also repaired the damaged cable found during the job.
-
01
Replaced Worn Rollers
The old garage door rollers were removed and replaced to improve how the door traveled along the tracks.
-
02
Installed a New Bottom Seal
The old flat seal was removed and a new bottom seal was installed along the base of the garage door.
-
03
Replaced the Damaged Cable
The damaged cable found during the repair was replaced before the job was completed.
-
04
Programmed a New Remote
The homeowner also wanted a remote controller for operating the garage door from a distance. Eric supplied and programmed a new remote for the Chamberlain system.
Photos From the Garage Door Repair
A closer look at the worn rollers, damaged cable, bottom seal, and other work completed during this North Mountain repair.
ADDITIONAL CUSTOMER REQUEST
A New Remote for the Chamberlain Opener
During the visit, the homeowner also asked for a remote controller so the garage door could be opened from a distance. Eric supplied a compatible remote and configured it for the existing Chamberlain garage door opener.
The Result
After the worn rollers, damaged cable, and bottom seal were replaced, the garage door was tested to confirm that it was operating properly. The customer also left the visit with a newly programmed remote for the existing Chamberlain opener.
COMPLETED AUGUST 3, 2026Garage Door Repair in North Mountain, Phoenix
This garage door repair was completed in the North Mountain area of Phoenix, near Sweetwater Ave. The map shows the general project area and does not identify the customer's residence.
Having Trouble With Your Garage Door?
If your garage door is noisy, moving roughly, or has worn parts, Glendale Garage Doors Pros can inspect the problem and explain what needs to be repaired.